EMD SD18 | ||
---|---|---|
Data Sheet Information Compiled by: JEAN-DENIS BACHAND | ||
Revised: 11 Feb. 2014 | Artwork by: Jean-Denis Bachand | |
- | ||
Engine Builder: EMD | Engine: 567D1 16 cylinder | |
Bore & Stroke | 8.5" X 10" | |
RPM (Maximum / Minimum) | 835 / 275 | |
Main Generator: GM - D22 | Horsepower: 1800 | |
Gear Ratio: 62:15 | Speed: 65 mph | |
Trucks: 6-Wheel | Configuration: C-C | |
Traction Motor Blowers: Electrical Drive (4) | Model: Delco | |
Weight: 390,000 lbs | Traction Motors: Six GM - D47 | |
Tractive Effort (starting) 97,500 lbs @25% | Tractive Effort (continuous): 67,500 lbs @ 9.3 mph | |
Multiple Unit Capability: Yes | Dynamic Braking: Yes | |
Auxilary Generator: Delco A8102 | Alternator: GMD14 | |
Air Brake: Westinghouse | Model: 24RL | |
Compressor: Gardner-Denver | Model: WBO | |
Quantity Built: 54 | Dates: 4/1960 to 3/1963 | |
- | - | |
Exterior Dimensions | SD18 | |
Total Length | 60'-08" | |
Wheel Diameter | 40" | |
Truck Wheel Base | 13'-07" | |
Height to Top Engine Hood | 13'-10.5" | |
Height to Top Cab | 15'-00" | |
Cab Width | 10'-00" | |
Top of Walkway | 4'-08.5" | |
Engine Hood Width | 7'-00" | |
Distance between Truck Centers | 35'-00" | |
Wheel Base (locomotive) | 48'-07.5" | |
Minimum Turning Radious | 57 degrees | |
- | - | |
Fuel Oil: 2400 | Lubricating Oil: 220 | |
Engine Cooling Water: 258 | Sand Capacity: 18 cu. ft. | |
Options: Vapor-Clarkson Steam Boiler OK4625 | ||
- | ||
Reference Sources:
|